Stone veneer installation in Beaumont CA - stone set on a sound wall, with water kept out
Tired of a plain stucco or block wall? We check what's under it first, then set stone that looks right and stays attached.
What goes into putting stone veneer on a house?
Stone veneer installation in Beaumont means setting a thin layer of stone, natural or manufactured, onto the face of a wall you already have. A plain stucco, block or framed wall gets the look of stone without anyone building a stone wall, and when it goes over a sound wall with the water barrier done right, you end up with a stone front that stays put.
Most people who call about stone have a stucco front, a block wall or a fireplace face they're tired of looking at, and they want to know if stone can go on it. The price mostly comes down to how many square feet you're covering, whether you pick manufactured or natural stone, how many corners and edges need trim pieces, how high we have to work and what shape the wall underneath is in. The schedule turns on that same wall, because trouble under an old finish only shows once it's opened up, and on stone delivery and any permit the city asks for. When I come out to look, I'll explain what I'd do and why, and that's where your number for your wall comes from.
How we do stone veneer installation
Before any stone goes up, I look at the wall behind it and find out what it's covered with now, because stone is only as good as what it's stuck to. If something under the finish is soft, cracked or wet, that gets fixed first, and sometimes we only find it once the old finish comes off. Then our crew puts on the water barrier, and we're careful with it because nobody sees it again once the stone is on and it's what keeps water out of your wall. After that we give the surface something for the stone to grip, set the stone course by course with the pieces mixed so no one color bunches up, finish the joints and clean up, and I check the wall before it's called done.
Sometimes the wall you want in stone doesn't exist yet, or the one you have isn't worth covering. A new yard or garden wall can go up as one of our concrete block walls and get its stone face once it's built, and when the work is down at the base of the house, the block underneath falls under foundation block wall installation, which we finish and check before any stone covers it.
Manufactured stone veneer
This suits most house fronts, columns and wainscots, because it's lighter than real stone and comes in steady shapes and colors that are easy to match from a sample. It's the usual pick when you want a stone look over a big area and want to keep the material cost down.
Natural thin stone veneer
This is real quarried stone sawn thin, so every piece is different and the color goes all the way through. It suits a fireplace face or an entry where you'll see it up close, and it usually costs more than manufactured stone.
What changes for stone veneer installation in Beaumont
I won't guess whether your stone job needs a permit, so before work starts we check with the City of Beaumont building office. If it does need one, we prepare the application, send it to the city and work through any inspections it calls for, and since the city only takes permit submittals digitally, with the application, plans and specifications, we put that package together for you. If your house sits in a High or Very High Fire Hazard Severity Zone, the city says homeowners there must meet home hardening requirements, and that new construction and renovations there must follow the Wildland-Urban Interface building codes, the rules for homes where neighborhoods meet open land. We'll find out from the city how those codes touch your wall before any stone gets ordered.
Around Beaumont we mostly see stucco houses where people want stone along the front, around the entry or on columns, plus block yard walls they'd like to dress up. We see the same houses and walls on jobs in Calimesa and Cherry Valley, and we work in other cities around Beaumont too, so if you're not sure we come out your way, just ask.
Stone veneer work up close
Why call us for stone veneer
The owner looks at every wall
I come out myself to look at the wall and give the estimate, and our crew of trained masons does the work. I check it again before it's called done, because the parts that matter most on a stone job get covered up.
Building in Beaumont since 2017
I learned under an old-school boss who'd make me cut out a joint and lay it again if it wasn't right, and I started this business in Beaumont in 2017. That's still how I judge a stone wall, one joint at a time.
Licensed and insured, worth checking
The state licensing board counts installing natural and manufactured stone as masonry contracting, so it's fair to ask any installer about their license. We're fully licensed and insured.
How long stone stays on depends on the wall behind it, so send us a note or call (951) 524-1277 with the wall's rough size and what it's covered with now.
(951) 524-1277Get a stone veneer estimate for your wall
We reply within one business day, by phone or by message, to set a time for me to come out. The estimate is free, on site and comes with no obligation, and I'll look at the wall with you and explain what I'd do and why.
Stone veneer questions from Beaumont homeowners
What is manufactured stone veneer made of?
Manufactured stone veneer is made from concrete, cast and colored to look like natural stone. Because it's made rather than quarried, you pick from set shapes and colors instead of whatever the quarry turns up.
Can stone veneer go over my existing stucco or block wall in Beaumont?
It can, if the wall is sound and has the right kind of surface. A masonry trade group's guidance says manufactured stone shouldn't go over a deteriorating or unsound wall, or over EIFS, a foam-board system with a stucco-like finish, and it isn't bonded straight onto clay masonry such as brick. Where a wall gives the stone nothing to bond to, we put on lath, a metal mesh, and a scratch coat, a rough base coat of mortar, first.
How much does stone veneer installation cost per square foot?
Installing stone veneer usually costs about $25 to $40 per square foot across the US. Treat that as a national starting figure for the installed work, not our price, since your own wall can come in above or below it. I'll give you a number for your wall once I've looked at it.
What goes behind stone veneer to keep water out of the wall?
A water-resistant barrier goes behind it, and over a framed wall the same trade group's guidance says it should go on in two separate layers, lapped like shingles from the bottom of the wall up. It's hidden once the stone is on, so ask whether each bid includes it. A rainscreen, a drainage layer behind the stone, is an optional step the group says helps stray water drain and dry faster.
How long does stone veneer last on a house?
The same trade group says installing to its recommended practices helps stone veneer perform as intended for decades. Part of that is fastening, since wood and gypsum sheathing alone can't fully support the lath and stone, and fasteners held only by sheathing can work loose, mainly when wet. Proper fastening also helps keep the veneer on in high winds, so ask any installer which practices their crew follows.
How do I check a stone veneer bid before hiring an installer?
Ask how they'll check the wall and its current finish, what barrier goes behind the stone, and how far above the soil and above driveways or patios the stone will stop. Guidance sets a gap for each on stud walls, so a careful installer should have a ready answer. I'm glad to go over those same points with you at the estimate.
Plan your stone veneer and the wall behind it
We take calls into the evening and on weekends, so call (951) 524-1277 or send the form with a few photos of your wall.
